Manufacturer of Hydraulic Grabs For Excavators - Scissor grab – GBM
Manufacturer of Hydraulic Grabs For Excavators - Scissor grab – GBM Detail:
Advantage of Scissor grab
1. Grab than high: 52 t ore grab, for example, routine long stay bar grab weight about 20 t around, grab a ratio of about 1.6, and 52 t cut type grab self-respect only 17 t, fetching ratio 2.05, each about 3 t grab reduce weight;
2. High efficiency: not only improve the fetching than has greatly increased the production efficiency, cutting type grab in grasping force is fully open to catch goods digging force is small, with the increase grab the closing of the digging force, which are consistent with the digging force just fetching goods need, so grab efficiency greatly improved, only need a smaller opening and closing schedule can complete closed, save for closing and opening time, improve the efficiency;
3. It is conducive to the clearance: because of the large opening of the shearing bucket, the grasping area of each bucket is 60% higher than that of the long pole, and no excavator and rake machine is required to complete the clearance work.
4. Low failure rate: due to the small number of scissors and less axle, this reduces the failure rate of some vulnerable parts. Due to these advantages of shear grab, many large bulk cargo grabs in foreign ports have been used in the shear bucket.The grab bucket can be used in the different pulley of the arrangement crane, can be used in any four cable door machine or the unloading machine.The product adopts the virtual design technology, and USES ANSYS to carry out the strength check and optimization of all parts, so as to make the grab self-redistribute more reasonable and use longer life!
Why choose GBM as your grab supplier?
1.As a leading manufacturer of 5000 square feet dedicated, licensed and certificated staff.
2.Mechanical and machinery design, structural design and analysis dynamic modeling and seismic, failure modes and effects analysis Auto CAD, 3DMax, Math CAD, Solid Works, ANSYS and SAP2000 Advanced.
3.All Main parts using reliable original imported brand.
4.GBM provide the SGS, CCS, BV, CE, ABS, ISO9000:2008, ISO14001:2004, OHSAS and etc certifications, also accept third party inspection, such asSGS Factory test etc.
All the product design drawing and calculation is reasonable and meet the international standard, all the productions drawing and calculation will be audit before production.
5.The welding meet the international standards, and no damage detection reports are required.
6.On the testing the actual lifting capacity is 1.25 times than the rated lifting capacity and will issued exactly testing report according to the technical agreements
GBM grab experience in career
3 unit 17CBM scissor grab
Project located in Myanmar
1 unit 11CBM scissor grab
Project located in South Korea
1 unit 8CBM scissor grab
Project located in France
1 unit 16CBM scissor grab
Project located in Cambodia
1 unit 16CBM scissor grab
Project located in India
1 unit 16CBM scissor grab
Project located in Cambodia
RFQ for rope grabs
Q1. Can the grab be customized?
Yes, every customer’s working condition is different, all of our products can be customized depend on customers’ requirements.
We could design leak proof, grab bucket with different capacity etc.
Q2. How is shippment of rope grab?
Normally shipping grabs in special containers FR,or bulk cargo vessel,which requires careful planning and preparation. Always make sure the hopper is secured so it doesn’t slide around during transport.
GBM have it own experienced department for safe delivery,utilizing the services of a professional will ensure that the grab is securely in place and the container is ready to ship.
Q3. Do you have installation team for test at shipyard?
Yes, GBM has own installation teams in China,not limited to use, we also have over-sea after-sales service and emergency spare parts reserves.
Q4:What is information do you need for provide drawing?
1.Where is the grab installed? Overhead cranes, gantry cranes or marine crane?
2. What is the main lifting material?
3. What is the grab volume required?
Product detail pictures:
Related Product Guide:
Well-run equipment, professional sales team, and better after-sales services; We are also a unified big family, everyone stick to the company value "unification, dedication, tolerance" for Manufacturer of Hydraulic Grabs For Excavators - Scissor grab – GBM, The product will supply to all over the world, such as: Tunisia, Romania, Romania, We've more than 10 years exported experience and our products and solutions have expored more than 30 countries around the word . We always hold the service tenet Client first,Quality first in our mind,and are strict with product quality. Welcome your visiting!
By Kama from Czech - 2016.10.25 15:53
This supplier's raw material quality is stable and reliable, has always been in accordance with the requirements of our company to provide the goods that quality meet our requirements.
By Renee from Bangladesh - 2016.11.12 12:31
© Copyright - 2018-2021 : All Rights Reserved. 