The GBM radio remote control grab bucket has evolved from several steel plates into a complete product. Its process involves all positions in the company. It is not a masterpiece of one person but a perfect combination of a team. We work meticulously, just because we always regard customers as God, quality and innovation are the foundation of the enterprise, and service is the way of our development. GBM is almost everywhere in the world port and sea.
The technology of remote grab is very mature, and the GBM team can cope with all kinds of sudden situations in use.
Each remote grab and hydraulic grab is produced in this factory. Let’s take a look at the manufacturing process and see how a high-quality remote grab is born.
It is essential to have a high-quality plasma cutter that cuts out any shape you want, with a complete burr-free cut.
GBM grab bucket body is taking shape.
The first station was a success. Although the welding has been completed, there are still a series of perfecting processes after.
The bucket body after sandblasting is very beautiful, and the surface is smooth without welding slag. This process can ensure that the surface paint is uniform and bright.
Overall boring, the entire bucket body can be put on it, which can ensure the accuracy and achieve zero error.
Let me introduce other parts. Have you seen the upper bolster, the welding is very good, and the welding process requirements: the welding seam is full, and there should be no arc craters at the three intersections…
The design of the strut is a box-shaped structure that is not easily deformed.
Middle bolster: It undertakes the role of connecting the upper bolster and the lower bolster, and the heavy responsibility of fixing the pulley is also entrusted to it.
The lower bolster, the oil cylinder, the middle bolster and the hydraulic system are perfectly combined, we will collectively call the hydraulic part.This part is fulled produced by our subsidery company which could fully control quality.
All the parts are assembled, there are still steps to follow before delivery.
Every grab delivery before our factory, we needs to test on this platform. The test must meet the requirements of 24-hour uninterrupted grasping of yellow sand.
Spray painting is a technical activity. The thin thickness of each coat of primer, middle coat and top coat needs to be uniform and uniform on the surface.
Each grab is ready to go to the wharf after loading!After the remote control grab was on board, the work was not over. In the early stage of order confirmation, the shipowner needs to tell us whether you need us to install the fixing brackets and the blue bolts.
During the commissioning stage of the remote control grab on the ship, and the owner will sign reciept for it perfectly if there are no problems.
Post time: May-11-2022